VBMT 160404-MF ET41P Carbide Finishing Inserts Edgetech

£4.89

(Exc. 20% VAT)

~~£17.47~~

Save:

72%

In stock, immediate despatch

–

+

Part Number

TI01405

Shape

VBMT

Relief Angle

Positive = 5? (Screw on)

Edge Length

16 (15.7mm)

Thickness ISO/mm

04 (4.76mm)

Radius

04 (0.4mm)

Grade

ET41P

Chipbreaker Code

MF

Interrupted Cut?

No - Stable conditions

Will Cut Steel? (P-Blue)

No

Will Cut Stainless Steel? (M-Yellow)

Yes

Will Cut Cast Iron? (K-Red)

No

Will Cut Heat Resistant Alloys? (S-Orange)

Yes - Excellent

Will Cut Non-Ferrous? (N-Green)

No

Will Cut Hardened Steel? (H-Grey)

No

Information

ISO Designation	Edge Length LE (mm)	Thickness S (mm)	Radius RE(mm)	Chipbreaker	Grade
VBMT160404-MF	16 (15.7)	04 (4.76)	04 (0.4)	MF	ET41P

Grade: ET41P
Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
Colour: Gold
Grade Summary: ET41P Optimised grade for clean HRSA materials.
Type of Cut: MF chipbreaker - Finishing cuts in materials with stable/uninterrupted cuts.
Best for: HRSA.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)	0.05 - 0.20
ap (mm)	0.2 - 2.0

Speeds Chart

Material VDI Group	Material Designation	Material Condition	Hardness	Grade	Speed M/Min
12	Stainless steel & Cast stainless steel	Ferritic/Martensitic, Annealed	≤200 HB	ET41P	95 - 290
13	Stainless steel & Cast stainless steel	Martensitic, Quenched & Tempered	≤240 HB	ET41P	95 - 290
14	Stainless steel & Cast stainless steel	Austenitic	≤180 HB	ET41P	90 - 210
31	Heat resistant super alloys	Fe based, Annealed	≤200 HB	ET41P	35 - 90
32	Heat resistant super alloys	Fe based, Aged	≤280 HB	ET41P	35 - 90
33	Heat resistant super alloys	Ni or Co based, Annealed	≤250 HB	ET41P	35 - 90
34	Heat resistant super alloys	Ni or Co based, Aged	≤350 HB	ET41P	35 - 90
35	Heat resistant super alloys	Ni or Co based, Cast	≤320 HB	ET41P	35 - 90
36	Titanium alloys	Pure Titanium	400 Rm	ET41P	35 - 90
37	Titanium alloys	Alpha & Beta alloys, Hardened	1050 Rm	ET41P	35 - 90