Last day for order dispatch is 2:30pm 19th December, we will be open again on 6th January.

0
£0.00
VBMT 160402-MF ET41P Carbide Finishing Inserts Edgetech
VBMT 160402-MF ET41P Carbide Finishing Inserts Edgetech

VBMT 160402-MF ET41P Carbide Finishing Inserts Edgetech

£5.14
(Exc. 20% VAT)
£18.34
Save:
72%
In stock, immediate despatch
–
+
Part Number
TI01404
Shape
VBMT
Relief Angle
Positive = 5? (Screw on)
Edge Length
16 (15.7mm)
Thickness ISO/mm
04 (4.76mm)
Radius
02 (0.2mm)
Grade
ET41P
Chipbreaker Code
MF
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
No
Will Cut Stainless Steel? (M-Yellow)
Yes
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
Yes - Excellent
Will Cut Non-Ferrous? (N-Green)
No
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE (mm)		Thickness
S (mm)		Radius
RE(mm)
ChipbreakerGrade
VBMT160402-MF16 (15.7)04 (4.76)02 (0.2)MFET41P


Grade: ET41P
Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
Colour: Gold
Grade Summary: ET41P Optimised grade  for clean HRSA materials.
Type of Cut: MF chipbreaker - Finishing cuts in materials with stable/uninterrupted cuts.
Best for: HRSA.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.04 - 0.15
ap (mm)0.1 - 2.0

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
12Stainless steel & Cast stainless steelFerritic/Martensitic, Annealed≤200 HBET41P95 - 290
13Stainless steel & Cast stainless steelMartensitic, Quenched & Tempered≤240 HBET41P95 - 290
14Stainless steel & Cast stainless steelAustenitic≤180 HBET41P90 - 210
31Heat resistant super alloysFe based, Annealed≤200 HBET41P35 - 90
32Heat resistant super alloysFe based, Aged≤280 HBET41P35 - 90
33Heat resistant super alloysNi or Co based, Annealed≤250 HBET41P35 - 90
34Heat resistant super alloysNi or Co based, Aged≤350 HBET41P35 - 90
35Heat resistant super alloysNi or Co based, Cast≤320 HBET41P35 - 90
36Titanium alloysPure Titanium400 RmET41P35 - 90
37Titanium alloysAlpha & Beta alloys, Hardened1050 RmET41P35 - 90
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!