0
£0.00
WNMG 080412-BM ET32C Carbide Medium & Unstable Cutting Inserts Edgetech
WNMG 080412-BM ET32C Carbide Medium & Unstable Cutting Inserts Edgetech

WNMG 080412-BM ET32C Carbide Medium & Unstable Cutting Inserts Edgetech

£3.81
(Exc. 20% VAT)
£13.59
Save:
72%
In stock, immediate despatch
–
+
Part Number
TI00811
Shape
WNMG
Relief Angle
Negative = 0° (Clamp or Lever)
Edge Length
08 (8.0mm)
Thickness ISO/mm
04 (4.76mm)
Radius
12 (1.2mm)
Grade
ET32C
Chipbreaker Code
BM
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
Yes - Excellent
Will Cut Stainless Steel? (M-Yellow)
No
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
No
Will Cut Non-Ferrous? (N-Green)
No
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE (mm)		Thickness
S (mm)		Radius
RE(mm)
ChipbreakerGrade
WNMG080412-BM08 (8.0)04 (4.76)12 (1.2)BMET32C


Grade: ET32C
Type: New Multi-layer CVD coated grades are finished with a special process to enable smoother chip flow.
Colour: Black
Grade Summary: ET32C Versatile grade for general turning of Steels.
Type of Cut: BM chipbreaker - Medium cutting and unstable conditions.
Best for: Moderate Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.15 - 0.30
ap (mm)1.5 - 3.0

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
1Non-alloy steel & Cast steel, Free cutting steel <0.15%C.Annealed≤125 HBET315C180 - 500
2Non-alloy steel & Cast steel, Free cutting steel <0.45%C.Annealed≤190 HBET315C180 - 500
3Non-alloy steel & Cast steel, Free cutting steel <0.45%C.Annealed≤250 HBET315C180 - 500
4Non-alloy steel & Cast steel, Free cutting steel <0.75%C.Annealed≤270 HBET315C180 - 500
5Non-alloy steel & Cast steel, Free cutting steel <0.75%C.Quenched & Tempered≤300 HBET315C180 - 500
6Low-alloy steel & Cast steel (less than 5% of alloying elements)Annealed≤180 HBET315C170 - 450
7Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤275 HBET315C170 - 450
8Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤300 HBET315C170 - 450
9Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤350 HBET315C170 - 450
10High-alloy steel, Cast steel & Tool steelAnnealed≤200 HBET315C60 - 180
11High-alloy steel, Cast steel & Tool steelQuenched & Tempered≤325 HBET315C60 - 180
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!