• Contact
  • VNMG 160408-MR ET24P Carbide Roughing Inserts Edgetech
    VNMG 160408-MR ET24P Carbide Roughing Inserts Edgetech

    VNMG 160408-MR ET24P Carbide Roughing Inserts Edgetech

    £5.14
    (Exc. 20% VAT)
    £18.34
    Save:
    72%
    In stock, immediate despatch
    +
    Part Number
    TI01806
    Shape
    VNMG
    Relief Angle
    Negative = 0° (Clamp or Lever)
    Edge Length
    16 (16mm)
    Thickness ISO/mm
    04 (4.76mm)
    Radius
    08 (0.8mm)
    Grade
    ET24P
    Chipbreaker Code
    MR
    Interrupted Cut?
    No - Stable conditions
    Will Cut Steel? (P-Blue)
    No
    Will Cut Stainless Steel? (M-Yellow)
    Yes - Excellent
    Will Cut Cast Iron? (K-Red)
    No
    Will Cut Heat Resistant Alloys? (S-Orange)
    Yes
    Will Cut Non-Ferrous? (N-Green)
    No
    Will Cut Hardened Steel? (H-Grey)
    No
    Europa Edgetech
    Information
    ISO DesignationEdge
    Length
    LE 
    (mm)
    Thickness
    S (mm)
    Radius
    RE(mm)
    ChipbreakerGrade
    VNMG160408-MR16 (16)04 (4.76)08 (0.8)MRET24P


    Grade: ET24P
    Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
    Colour: Gold
    Grade Summary: ET24P Optimised grade for interrupted cutting of Stainless Steel and skin &scale cuts in HRSA.
    Type of Cut: MR chipbreaker - Roughing of Stainless Steels and scale/skin HRSA
    Best for: Stainless Steels.

    Technical Data & Info

    Feed Rate & Depth of Cut

    fn (mm/rev)0.30 - 0.50
    ap (mm)2.0 - 5.5

    Speeds Chart

    Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
    12Stainless steel & Cast stainless steelFerritic/Martensitic, Annealed≤200 HBET24P160 - 220
    13Stainless steel & Cast stainless steelMartensitic, Quenched & Tempered≤240 HBET24P160 - 220
    14Stainless steel & Cast stainless steelAustenitic≤180 HBET24P100 - 200
    Turning Calculator
    Document

    Turning Speeds Calculator

    RPM
    mtrs/min
    mm

    Results

    RPM
    mtrs/min
    Customer Reviews (0)

    Be the first to Write a Review for this item!