VNMG 160404-MF ET24P Carbide Finishing Inserts Edgetech

£5.14

(Exc. 20% VAT)

~~£18.34~~

Save:

72%

In stock, immediate despatch

–

+

Part Number

TI01797

Shape

VNMG

Relief Angle

Negative = 0° (Clamp or Lever)

Edge Length

16 (16mm)

Thickness ISO/mm

04 (4.76mm)

Radius

04 (0.4mm)

Grade

ET24P

Chipbreaker Code

MF

Interrupted Cut?

No - Stable conditions

Will Cut Steel? (P-Blue)

No

Will Cut Stainless Steel? (M-Yellow)

Yes - Excellent

Will Cut Cast Iron? (K-Red)

No

Will Cut Heat Resistant Alloys? (S-Orange)

Yes

Will Cut Non-Ferrous? (N-Green)

No

Will Cut Hardened Steel? (H-Grey)

No

Information

ISO Designation	Edge Length LE (mm)	Thickness S (mm)	Radius RE(mm)	Chipbreaker	Grade
VNMG160404-MF	16 (16)	04 (4.76)	04 (0.4)	MF	ET24P

Grade: ET24P
Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
Colour: Gold
Grade Summary: ET24P Optimised grade for interrupted cutting of Stainless Steel and skin &scale cuts in HRSA.
Type of Cut: MF chipbreaker - Finishing of Stainless Steel.
Best for: Stainless Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)	0.07 - 0.30
ap (mm)	0.2 - 1.5

Speeds Chart

Material VDI Group	Material Designation	Material Condition	Hardness	Grade	Speed M/Min
12	Stainless steel & Cast stainless steel	Ferritic/Martensitic, Annealed	≤200 HB	ET24P	160 - 220
13	Stainless steel & Cast stainless steel	Martensitic, Quenched & Tempered	≤240 HB	ET24P	160 - 220
14	Stainless steel & Cast stainless steel	Austenitic	≤180 HB	ET24P	100 - 200