TNMG 160404-BF ET32C Carbide Finishing Inserts Edgetech

£3.74

(Exc. 20% VAT)

~~£13.35~~

Save:

72%

In stock, immediate despatch

–

+

Part Number

TI00424

Shape

TNMG

Relief Angle

Negative = 0° (Clamp or Lever)

Edge Length

16 (16mm)

Thickness ISO/mm

04 (4.76mm)

Radius

04 (0.4mm)

Grade

ET32C

Chipbreaker Code

BF

Interrupted Cut?

No - Stable conditions

Will Cut Steel? (P-Blue)

Yes - Excellent

Will Cut Stainless Steel? (M-Yellow)

No

Will Cut Cast Iron? (K-Red)

No

Will Cut Heat Resistant Alloys? (S-Orange)

No

Will Cut Non-Ferrous? (N-Green)

No

Will Cut Hardened Steel? (H-Grey)

No

Information

ISO Designation	Edge Length LE (mm)	Thickness S (mm)	Radius RE(mm)	Chipbreaker	Grade
TNMG160404-BF	16 (16)	04 (4.76)	04 (0.4)	BF	ET32C

Grade: ET32C
Type: New Multi-layer CVD coated grades are finished with a special process to enable smoother chip flow.
Colour: Black
Grade Summary: ET32C Versatile grade for general turning of Steels.
Type of Cut: BF chipbreaker - Finishing cuts in materials.
Best for: Moderate Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)	0.05 - 0.25
ap (mm)	0.5 - 2.5

Speeds Chart

Feed Rate & Depth of Cut

fn (mm/rev)	0.05 - 0.20
ap (mm)	0.5 - 2.0

Speeds Chart

Material VDI Group	Material Designation	Material Condition	Hardness	Grade	Speed M/Min
1	Non-alloy steel & Cast steel, Free cutting steel <0.15%C.	Annealed	≤125 HB	ET32C	180 - 380
2	Non-alloy steel & Cast steel, Free cutting steel <0.45%C.	Annealed	≤190 HB	ET32C	180 - 380
3	Non-alloy steel & Cast steel, Free cutting steel <0.45%C.	Annealed	≤250 HB	ET32C	180 - 380
4	Non-alloy steel & Cast steel, Free cutting steel <0.75%C.	Annealed	≤270 HB	ET32C	180 - 380
5	Non-alloy steel & Cast steel, Free cutting steel <0.75%C.	Quenched & Tempered	≤300 HB	ET32C	180 - 380
6	Low-alloy steel & Cast steel (less than 5% of alloying elements)	Annealed	≤180 HB	ET32C	110 - 350
7	Low-alloy steel & Cast steel (less than 5% of alloying elements)	Quenched & Tempered	≤275 HB	ET32C	110 - 350
8	Low-alloy steel & Cast steel (less than 5% of alloying elements)	Quenched & Tempered	≤300 HB	ET32C	110 - 350
9	Low-alloy steel & Cast steel (less than 5% of alloying elements)	Quenched & Tempered	≤350 HB	ET32C	110 - 350
10	High-alloy steel, Cast steel & Tool steel	Annealed	≤200 HB	ET32C	60 - 300
11	High-alloy steel, Cast steel & Tool steel	Quenched & Tempered	≤325 HB	ET32C	60 - 300