SNMG 120412-KR ET101C Carbide Roughing Inserts Edgetech

£3.81

(Exc. 20% VAT)

~~£13.59~~

Save:

72%

In stock, immediate despatch

–

+

Part Number

TI01511

Shape

SNMG

Relief Angle

Negative = 0° (Clamp or Lever)

Edge Length

12 (12.7mm)

Thickness ISO/mm

04 (4.76mm)

Radius

12 (1.2mm)

Grade

ET101C

Chipbreaker Code

KR

Interrupted Cut?

No - Stable conditions

Will Cut Steel? (P-Blue)

No

Will Cut Stainless Steel? (M-Yellow)

No

Will Cut Cast Iron? (K-Red)

Yes - Excellent

Will Cut Heat Resistant Alloys? (S-Orange)

No

Will Cut Non-Ferrous? (N-Green)

No

Will Cut Hardened Steel? (H-Grey)

No

Information

ISO Designation	Edge Length LE (mm)	Thickness S (mm)	Radius RE(mm)	Chipbreaker	Grade
SNMG120412-KR	12 (12.7)	04 (4.76)	12 (1.2)	KR	ET101C

Grade: ET101C
Type: New Multi-layer CVD coated grades are finished with a special process to enable smoother chip flow.
Colour: Black
Grade Summary: ET101C First choice for stable turning Cast Iron.
Type of Cut: KR chipbreaker - Cast Iron roughing and interrupted cuts.
Best for: Cast Iron.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)	0.30 - 0.60
ap (mm)	1.5 - 5.0

Speeds Chart

Material VDI Group	Material Designation	Material Condition	Hardness	Grade	Speed M/Min
15	Grey cast iron	Pearlitic/Ferritic	≤180 HB	ET101C	170 - 420
16	Grey cast iron	Pearlitic (Martensitic)	≤260 HB	ET101C	170 - 420
17	Nodular cast iron	Ferritic	≤160 HB	ET101C	120 - 410
18	Nodular cast iron	Pearlitic	≤250 HB	ET101C	120 - 410
19	Malleable cast iron	Ferritic	≤130 HB	ET101C	120 - 410
20	Malleable cast iron	Pearlitic	≤230 HB	ET101C	120 - 410