Last day for order dispatch is 2:30pm 19th December, we will be open again on 6th January.

0
£0.00
SNMG 120412-BC ET32C Carbide Semi-Roughing Inserts Edgetech
SNMG 120412-BC ET32C Carbide Semi-Roughing Inserts Edgetech

SNMG 120412-BC ET32C Carbide Semi-Roughing Inserts Edgetech

£4.00
(Exc. 20% VAT)
£14.27
Save:
72%
In stock, immediate despatch
–
+
Part Number
TI00989
Shape
SNMG
Relief Angle
Negative = 0° (Clamp or Lever)
Edge Length
12 (12.7mm)
Thickness ISO/mm
04 (4.76mm)
Radius
12 (1.2mm)
Grade
ET32C
Chipbreaker Code
BC
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
Yes - Excellent
Will Cut Stainless Steel? (M-Yellow)
No
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
No
Will Cut Non-Ferrous? (N-Green)
No
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE (mm)		Thickness
S (mm)		Radius
RE(mm)
ChipbreakerGrade
SNMG120412-BC12 (12.7)04 (4.76)12 (1.2)BCET32C


Grade: ET32C
Type: New Multi-layer CVD coated grades are finished with a special process to enable smoother chip flow.
Colour: Black
Grade Summary: ET32C Versatile grade for general turning of Steels.
Type of Cut: BC chipbreaker - Cast Iron and medium roughing of Steel
Best for: Moderate Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.20 - 0.40
ap (mm)1.5 - 4.0

Speeds Chart

Feed Rate & Depth of Cut

fn (mm/rev)0.05 - 0.20
ap (mm)0.5 - 2.0

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
1Non-alloy steel & Cast steel, Free cutting steel <0.15%C.Annealed≤125 HBET32C180 - 380
2Non-alloy steel & Cast steel, Free cutting steel <0.45%C.Annealed≤190 HBET32C180 - 380
3Non-alloy steel & Cast steel, Free cutting steel <0.45%C.Annealed≤250 HBET32C180 - 380
4Non-alloy steel & Cast steel, Free cutting steel <0.75%C.Annealed≤270 HBET32C180 - 380
5Non-alloy steel & Cast steel, Free cutting steel <0.75%C.Quenched & Tempered≤300 HBET32C180 - 380
6Low-alloy steel & Cast steel (less than 5% of alloying elements)Annealed≤180 HBET32C110 - 350
7Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤275 HBET32C110 - 350
8Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤300 HBET32C110 - 350
9Low-alloy steel & Cast steel (less than 5% of alloying elements)Quenched & Tempered≤350 HBET32C110 - 350
10High-alloy steel, Cast steel & Tool steelAnnealed≤200 HBET32C60 - 300
11High-alloy steel, Cast steel & Tool steelQuenched & Tempered≤325 HBET32C60 - 300
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!