Toolholder
ISO Code | Hand of
Tool | Takes Insert | Shank Dia. (mm)
DCON | Shank Across Flats (mm)
H | WF | Overall
Length
LF | Clamp Type | Thru Coolant | Min Bore Dia.
DMIN |
| S50V PSKNL 15C | Left Hand | SN_ _ 1506_ _ | 50 | 47 | 35 | 400 | Lever Lock | No | 63 |
Boring Bar Features
This boring bar features a shim/seat (retained by a shim pin) and has a Lever Lock clamping mechanism to secure the insert. The L-shaped lever grips the centre hole of the insert from underneath and draws it into the corner of the pocket when the lever screw is tightened.
Boring Bar Coating
All Europa turning, grooving and threading holders now have E-COAT eco-friendly coating to give up to five times longer tool life.
- High abrasion resistance
- High surface hardness >60HRc
- High resistance to tempering
- High fatigue strength
- High scratch & impact resistance
- High corrosion resistance
- Up to 5 times longer tool life
- E-COAT is environmentally friendly
- Coating has no impact on human health
- Non-polluting process used in coating tools
Spares
Clamp: TTAP-2
Clamp Screw: HBI6
Shim: HPS15NA
Shim Pin: HAY464
Lever: HL443
Lever Screw: HLV442
