End Mill Dia. | Shank | Flange Diameter D6 | Gauge Length GL | Through Coolant | Accuracy | Pull Stud Thread RTK |
25mm | DV40 | 63mm | 90mm | Form AD - Through Centre | G2.5 @ 20,000RPM | M16 |
About our DV (DIN 69871) Medium/High Accuracy End Mill/Weldon Holders:
We are proud to supply the Range of DV (DIN 69871) equipment. These are supplied to G2.5 @ 20,000rpm accuracy at competitive prices.
Tests have shown, when using carbide tools our medium-high accuracy End Mill/Weldon holders can increase tool life by up to 130%.
These holders are designed to mounting straight shank tools with a weldon flat on the shank.
The holders are also Form AD meaning that coolant can pass through the centre of the holder directly to the job being machined.
If you need coolant provided through the flange or are unsure which option is correct for your machine please look at our holders with Form AD/B. These can be switched between coolant through the flange or through the centre of the holder by adjusting the internal screw. |