0
£0.00
DNMG 150612-MR ET24P Carbide Roughing Inserts Edgetech
DNMG 150612-MR ET24P Carbide Roughing Inserts Edgetech

DNMG 150612-MR ET24P Carbide Roughing Inserts Edgetech

£5.05
(Exc. 20% VAT)
£18.04
Save:
72%
In stock, immediate despatch
–
+
Part Number
TI00733
Shape
DNMG
Relief Angle
Negative = 0° (Clamp or Lever)
Edge Length
15 (15mm)
Thickness ISO/mm
06 (6.35mm)
Radius
12 (1.2mm)
Grade
ET24P
Chipbreaker Code
MR
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
No
Will Cut Stainless Steel? (M-Yellow)
Yes - Excellent
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
Yes
Will Cut Non-Ferrous? (N-Green)
No
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE (mm)		Thickness
S (mm)		Radius
RE(mm)
ChipbreakerGrade
DNMG150612-MR15 (15)06 (6.35)12 (1.2)MRET24P


Grade: ET24P
Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
Colour: Gold
Grade Summary: ET24P Optimised grade for interrupted cutting of Stainless Steel and skin &scale cuts in HRSA.
Type of Cut: MR chipbreaker - Roughing of Stainless Steels and scale/skin HRSA
Best for: Stainless Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.30 - 0.55
ap (mm)2.0 - 5.5

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
12Stainless steel & Cast stainless steelFerritic/Martensitic, Annealed≤200 HBET24P160 - 220
13Stainless steel & Cast stainless steelMartensitic, Quenched & Tempered≤240 HBET24P160 - 220
14Stainless steel & Cast stainless steelAustenitic≤180 HBET24P100 - 200
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!