End
Mill
Dia. | Shank | Flange
Diameter
D6 | Gauge
Length
GL | Through
Coolant | Accuracy | Pull Stud
Thread
RTK |
| 32mm | BT40 | 63mm | 100mm | Form AD - Through Centre | G2.5 @ 20,000RPM | M16 |
About our BT/MAS403 Medium/High Accuracy End Mill/Weldon Holders:
We are proud to supply the Range of BT/MAS403 equipment. These are supplied to G2.5 @ 20,000rpm accuracy at competitive prices.
Tests have shown, when using carbide tools our medium-high accuracy End Mill/Weldon holders can increase tool life by up to 130%.
These holders are designed to mounting straight shank tools with a weldon flat on the shank.
The holders are also Form AD meaning that coolant can pass through the centre of the holder directly to the job being machined.
| If you need coolant provided through the flange or are unsure which option is correct for your machine please look at our holders with Form AD/B. These can be switched between coolant through the flange or through the centre of the holder by adjusting the internal screw. |
