Insert
Size | Edge
Length
L | Internal /
External | Hand | Pitch (mm - TPI) | Thread
Form | Grade |
| 4 | 22 | Internal | Right
Hand | 3.5-5.0 / 7-5 | Part Profile 60 Degrees | VTX |
Dimensions (mm):
r: 0.30
X: 1.7
Y: 2.5
VTX Grade: A general purpose grade with tough submicron substrate. Provides good fracture toughness in non-rigid cutting conditions. TiAlN coated. This is Vargus's best all-round grade and will cut steels, stainless, heat resistant alloys, aluminium, plastics etc.
Toolholder: AVR..-4RH (e.g. a 20mm diameter toolholder = AVR20-4RH)
Shim:YI4
