Blade
Width
(mm) | Cutting
Width
(mm) | Height of
Blade
HW (mm) | Cutting
Height
H1 (mm) | Length of
Blade
L (mm) | Insert
Number | Insert
Key |
| 2 | 2.2 | 32 | 25 | 150 | OP22 | SL4 |
Parting off Blade Features
This steel parting off blade is designed to the corresponding inserts noted in the above table and is used for making external groove recesses in outside diameters OR for cutting off excess diameter material accurately. The blade has an insert pocket on each end in case one becomes damaged. Various cutting depths in material can be achieved by extending the blade out-with the block and clamping at the desired length. Inserts can be removed from the blade using the key provided.
Please make sure the block you have matches the blade height listed in the table above.
