Boring Bar Kit
Part Numbers | Shank
Diameter
D1 (mm) | Dimension
F (mm) | Overall
Length
L (mm) | Shank
Length
L1 (mm) | Minimum
Bore Dia. (mm) | Takes Insert |
| E12 T11 | 25 | 6 | 95 | 35 | 12 | TC_ _ 1102 |
| E16 T11 | 25 | 8 | 105 | 35 | 16 | TC_ _ 1102 |
| E20 T11 | 25 | 10 | 135 | 35 | 20 | TC_ _ 1102 |
| E25 T11 | 25 | 12.5 | 160 | 35 | 25 | TC_ _ 1102 |
| R150 C09 | 25 | 22 | 134 | 88 | 44 | CC_ _ 09T3 |
About our Axial / Radial 5 Piece Boring Bar Set - 25mm:
This boring bar kit is designed to fit into our 100mm Diameter Boring head (Part number: OM31435) or other boring heads with a 25mm holder capacity.
Unlike older braized tool kits, this kit is indexable (it takes carbide inserts). The benefit of indexable holders are that once the edge wears or breaks the insert can be turned to a new sharp cutting edge. The other major advantage of using an indexable system is that there are a large selection of radii, grades, geometries and coatings to machine whatever material you come up against.
