0
£0.00
DCGT 11T308-AL ET10D Carbide Finishing to Roughing Inserts Edgetech
DCGT 11T308-AL ET10D Carbide Finishing to Roughing Inserts Edgetech

DCGT 11T308-AL ET10D Carbide Finishing to Roughing Inserts Edgetech

£10.29
(Exc. 20% VAT)
£36.74
Save:
72%
In stock, immediate despatch
–
+
Part Number
TI00245
Shape
DCGT
Relief Angle
Positive = 7? (Screw on)
Edge Length
11 (11.2mm)
Thickness ISO/mm
T3 (3.97mm)
Radius
08 (0.8mm)
Grade
ET10D
Chipbreaker Code
AL
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
No
Will Cut Stainless Steel? (M-Yellow)
No
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
No
Will Cut Non-Ferrous? (N-Green)
Yes - Excellent
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE (mm)		Thickness
S (mm)		Radius
RE(mm)
ChipbreakerGrade
DCGT11T308-AL11 (11.2)T3 (3.97)08 (0.8)ALET10D


Grade: ET10D
Type: TaC Diamond coated.
Colour: Polished Silver
Grade Summary: ET10D First choice for high speed turning of aluminium and Si >10%.
Type of Cut: AL chipbreaker - Finishing to Roughing cuts in Aluminium.
Best for: Aluminium and non ferrous materials.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.10 - 0.30
ap (mm)1.0 - 2.5

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
12Stainless steel & Cast stainless steelFerritic/Martensitic, Annealed≤200 HBET10D160 - 220
13Stainless steel & Cast stainless steelMartensitic, Quenched & Tempered≤240 HBET10D160 - 220
14Stainless steel & Cast stainless steelAustenitic≤180 HBET10D100 - 200
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!