CCMT 09T302-MF ET21P Carbide Finishing Inserts Edgetech
CCMT 09T302-MF ET21P Carbide Finishing Inserts Edgetech

CCMT 09T302-MF ET21P Carbide Finishing Inserts Edgetech

£3.27
(Exc. 20% VAT)
£11.69
Save:
72%
In stock, immediate despatch
+
Part Number
TI01302
Shape
CCMT
Relief Angle
Positive = 7? (Screw on)
Edge Length
09 (9.2mm)
Thickness ISO/mm
T3 (3.97mm)
Radius
02 (0.2mm)
Grade
ET21P
Chipbreaker Code
MF
Interrupted Cut?
No - Stable conditions
Will Cut Steel? (P-Blue)
Yes
Will Cut Stainless Steel? (M-Yellow)
Yes - Excellent
Will Cut Cast Iron? (K-Red)
No
Will Cut Heat Resistant Alloys? (S-Orange)
Yes
Will Cut Non-Ferrous? (N-Green)
No
Will Cut Hardened Steel? (H-Grey)
No
Europa Edgetech
Information
ISO DesignationEdge
Length
LE 
(mm)
Thickness
S (mm)
Radius
RE(mm)
ChipbreakerGrade
CCMT09T302-MF09 (9.2)T3 (3.97)02 (0.2)MFET21P


Grade: ET21P
Type: Single layer PVD coated grades are designed to balance edge strength with extended tool life..
Colour: Gold
Grade Summary: ET21P Optimised grade for cutting of stainless steel at high cutting speeds.
Type of Cut: MF chipbreaker - Finishing cuts in materials with stable/uninterrupted cuts.
Best for: Stainless Steels.

Technical Data & Info

Feed Rate & Depth of Cut

fn (mm/rev)0.04 - 0.15
ap (mm)0.1 - 2.0

Speeds Chart

Material VDI GroupMaterial DesignationMaterial ConditionHardnessGradeSpeed M/Min
12Stainless steel & Cast stainless steelFerritic/Martensitic, Annealed≤200 HBET21P160 - 220
13Stainless steel & Cast stainless steelMartensitic, Quenched & Tempered≤240 HBET21P160 - 220
14Stainless steel & Cast stainless steelAustenitic≤180 HBET21P100 - 200
Turning Calculator
Document

Turning Speeds Calculator

RPM
mtrs/min
mm

Results

RPM
mtrs/min
Customer Reviews (0)

Be the first to Write a Review for this item!