Insert
Size | Edge
Length
L | Internal /
External | Hand | Pitch (TPI) | Thread
Form | Grade |
| 3 | 16 | Internal | Right
Hand | 18 (Pg11/13.5/16) | PG | VTX |
Dimensions (mm):
h min: 0.67
X: 0.8
Y: 0.9
VTX Grade: A general purpose grade with tough submicron substrate. Provides good fracture toughness in non-rigid cutting conditions. TiAlN coated. This is Vargus's best all-round grade and will cut steels, stainless, heat resistant alloys, aluminium, plastics etc.
Toolholder: AVR..-3RH (e.g. a 20mm diameter toolholder = AVR20-3RH)
Shim:YI3
